Grade 42CRMO4 (+QT) comparable but not identical international material grades are; B43 acc. to ISO 683-17, grade 4140 acc. to ASTM A866, 42CrMo4 acc. to EN-10083-3 2.2 Chemical composition Check analysis is according to Grade B43, see ISO 683-17:1999. The calculated ideal critical diameter DI, should be 115 - 205 mm, acc. to ASTM A255. 42CrMo4 - Ovako19 rows · The steel is applicable to induction hardening. The surface hardness will exceed min. 53
quenched and tempered condition. After the oil quenching, the steel will be through hardened up to ø60 mm bar diameter. The microstructure of larger dimensions is not fully martensite. The steel is applicable to induction hardening. The surface hardness will exceed min. 53 HRC. 42CrMo4 can be delivered M-treated in order to optimize the machinability. 42CrMo4 Alloy Steel West Yorkshire SteelSuitable for nitriding which gives a shallow depth wear resistant case to provide maximum wear and abrasion resistance. Also suitable for induction or flame hardening which can give a case hardness of 50 HRc or higher. We welcome export enquiries for 42CrMo4 alloy steel. 42CrMo4 Round Bars, 42CrMo4 Carbon Steel Bars These steels show positive response to all variety of heat treatments. 42CrMo4 is a 1% chromium molybdenum medium hardenability general purpose high tensile steel generally supplied hardened and tempered in the tensile range of 850 1000 Mpa (condition T). 42CrMo4 is a high quality, high tensile alloy steel usually supplied readily machineable in 'T' condition, giving good ductility and shock
Tool & Die Steels Inc. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 42CrMo4 Round Bar 42CrMo4 Flat Bar 42CrMo4 Hollow Bar 42CrMo4 Tube / Pipe 42CrMo4 Sheet / Plate 42CrMo4 Strip / Coil 42CrMo4 Wire 42CrMo4 Forging 42CrMo4 Tube / 42CrMo4 |42CrMoS4|1.7225 - Xingsheng Special steel42CrMo4 is a heat treatable steel which contains at least 0.9%Cr,0.15%Mo as strengthening elements.After quenched and tempered, It obtains high strength, good low-temperature impact toughness with a typical tensile strength of 900 -1200 N/mm2.42CrMo4 steel has better performance than 34CrMo4 steel due to the higher carbon and chromium content.Similar to AISI 4140,only a little difference in 42CrMo4V,42CrMo4V forging parts,42CrMo4V forged rings 42CrMo4V is alloy steel We could delivery 42CRMO4V forging material as per the standard of EN 10277-5 We use EAF + LF + VD melting methods to melt the material of 42CRMO4V As per heat treatment of 42CRMO4V forged parts, We could do anealed, normalized, hardening
AISI 4140 is defined as a low alloy steel which has 1% Cr-Mo as strengthening alloy elements.Compared with AISI 4130, it has a higher carbon content with good balance of strength, toughness ,abrasion and impact resistance and heat treatment capabilities,but poor in weldability characteristics.AISI 4140 is generally supplied in quenched and tempered condition with hardness 28-32HRC. AISI 4140 Alloy Steel (UNS G41400)AISI 4140 alloy steel is annealed at 872°C (1600°F) followed by slowly cooling in the furnace. Tempering. AISI 4140 alloy steel can be tempered at 205 to 649°C (400 to 1200°F) depending upon the desired hardness level. The hardness of the steel can be increased if it has a lower tempering temperature. AISI SAE 4140 Steel - JIS SCM440 - DIN 1.7225 - Songshun SteelDIN 1.7225 steel can be tempered at 205 to 649°C (400 to 1200°F) depending upon the desired hardness level. The hardness of the steel can be increased if it has lower tempering temperature. For example, tensile strength of 225 ksi cab be achieved by tempering at 316°C (600°F), and tensile strength of 130 ksi can be achieved by tempering at
Heat-treatable steel (tempered condition) that can be used for a wide range of applications with a high degree of strength and toughness. Often used for demanding applications in automotive engineering. In quenched and tempered condition it is used in machine construction. Working hardness:27 (min. hardness / delivery condition) - 48 HRC. G42CrMo4 ( 1.7231 ) - Steel NumberCast steel Chemical composition of steel G42CrMo4 (1.7231), Standards of steel G42CrMo4 (1.7231) Mechanical Properties of steel G42CrMo4 (1.7231) Equivalent grades of steel G42CrMo4 (1.7231) steel G42CrMo4 (1.7231) Tensile Strength, Elongation, Proof strength , Hardness METALLOGRAPHIC INVESTIGATION OF INDUCTION Probably hardness on the surface of part is something higher, because there is hardness gradient from the surface to the interior of the specimen. There is no doubt that with optimal of quenching parameters choice higher values can be achieved (figure . It can be seen from the8 same figure (CCT diagram)that max mardness for 42CrMo4 steel can be
CORE HARDNESS HV/HRC SURFACE HARDNESS HV1; 4130:30CrMo4:C=0.30 Cr=1 Mo=0.2:300 / 30:640 680:4140:42CrMo4:C=0.40 Cr=1 Mn=0.9 Mo=0.2:300 / 30:650 700:4340:C=0.40 Cr=0.8 Ni=1.8 Mo=0.25:310 / 31:650 700:30NiCrMo12:C=0.30 Cr=0.8 Ni=2.8 Mo=0.12:310 / 31:600 650:35NiCrMo15:C=0.35 Cr=1.7 Ni=3.8 Mo=0.15:330 / 33:800 850 Nitriding steels, hardenable alloy steels, carbon steels Grade AISI Grade UNI Main alloy components Core Hardness HV/HRC Surface Hardness Hv1; N135M:38CrAlMoA:C=0.38 Cr=1.7 Mo=0.3 Al=1:350/36:1190-1290:Nitralloy N Stainless alternatives to 42CrMo4 - Metal and Metallurgy At the hardness level for a 700 MPa YS carbon steel, the metal-to-metal wear resistance (unlubed) is not good based on my tests on 4130 (not 4140). At this hardness level, carbon is not so important, so 4130 is an appropriate reference alloy.
Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 42CrMo4 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-80247006 E-mail:[email protected] Website:https://tool-die
Post A Require